Beitrittsdatum: 21. Nov. 2022



Yesterday i learned that when you bridge your Comcast gateway, you can no longer access it with but instead 192.168.100. is a Private IP Address for use only inside of a Private Network. This address can be used by routers, modems, and other many devices. You are ...

However, it is set to have all connected devices have IP 192.168.100. ... You can follow the question or vote as helpful, but you cannot ...

Log in to the administration page of the router (refer to question 1:How to use to log in to the ... IP First Three Bytes: 192.168.100.

That was not my question. bbearren wrote: Have you tried bypassing your router? Connect your PC Ethernet cable directly to Port 1 on the modem and try ... – 192.168.l00.1 is the default IP address to login admin panel to change WiFi password, SSID, and router settings at

192.168.100. 1, empty, empty. 192.168.l00.1 huawei, Huawei, 1234. ip:, 192.168.l00.1 huawei login, user. 192.168.100.q, admin, Password.

Well the answer to question what is the difference between is simple that both of them are different IP addresses of a network.

Not the answer you're looking for? Browse other questions tagged. routing · subnet · networking. or ask your own question. ... Five Stack Exchange ...

Question: The # nmap --script=ftp-brute \( 192.168 .100 .1 \) command attempts a brute-force attack to guess usernames and passwords on the FTP server on ... router login and password for your device at We will help you get into your router or other devices on your network ... – 192.168.l00.1 is a private IP Address used as a default gateway address to log in as admin to router settings. It is assigned ...Huawei: root

1.1) much more often than 192.168.100.x. Was this page helpful?

<a href="" target="_blank">Check this Site:</a>. Copy to Clipboard.

This is the most common question; is the IP address you are using to log in for your wifi router correct or not? Here is some Right Vs Wrong Combination ...

It doesn't respond to addresses outside it subnet. What I think I need is NAT rules that use 192.168.100.x for and the public IP address for ... – 192.168.l00.1 is a private IP Address that is used as a default gateway address to login as admin to settings of router.‎Change WiFi Password · ‎Default Router Passwords · ‎ · ‎

The IP address belongs to the private address space, and it's used by local network devices to identify themselves. Despite its strange appearance ...

As is a personal IPv4 network address, means that you can't attach to the user router or device from outside the local network similarly with the ...

The IP address provides you the admin access to your router and helps you make changes to your network settings. You can configure the default ...

The is wrong, the correct IP is It doesn't matter, you should just enter the correct IP which is

If the only thing you want is to access the router, I recommend you try to access the IPs on the gateway range, 192.168.100.X usually the first ones are the set to these devices

Others IP Address:

http Admin


First Go to the Network Setting >> Select the Network You are Using >> Go to Advance Properties >> Choose the TCP/IP option and you will see Router: that’s your Default Router Login IP.

Sorry this didn't help.

#4: If you're trying to access your router through your mobile device, you can connect to the network with WiFi and check the advanced properties to learn its IP address. 

You need to click on the LOGIN Button below to Access to your Admin PanelLoginEnter instead of

How satisfied are you with this reply?

In that case check our router IP address list. You can also read our tutorial on how to find your router's ip address for more help.

It happens to all of us that we forget the username/password or both and then we can't log in. If you have lost or forgotten the username and password for then don't worry, you can easily recover your username/password.

2. Source - old and new certificates, sometimes very slow - only certificates with "not after" > of the last months are listed

You said that accessing goes a WebIS page (not the router configuration page), it is the switch configuration page.

How to login to access the router management interface, the first thing that you have to do is to make sure that the default gateway address for your router or modem is none other than If the default gateway is not 192.168.l00.1 then you wouldn’t be able to access the login page, instead, the browser won’t be able to reach any webpage. So, make sure that your router/modem has as the default gateway address.Once that is done, connect your device to the router/modem either wirelessly or using an ethernet cable. Follow these steps further to log in to a web browser that you use to access the internet.Open a new tab and in the address bar, type or and press Enter.You will now see a login screen. You need to enter the login username and password to continueEnter the username and password to proceed. (Default login credentials can be found on the box of the router or you can search for the on the internet if you are unaware of the default credentials of your router/modem)You will be now logged in to the router management interface.

Thanks for your feedback, it helps us improve the site.

I need to clarify some things before answering your questions:

Last Result: - 2022-10-11 23:24:57Do you like this page? Support this tool, add a link on your page:Check this Site:

#2: You can also use your PC to figure out the IP address. If you have a Windows PC, you can either use the command prompt or the Network and Sharing Center to see your IP address. IP addresses are usually listed as the default gateway. 


Examine if the firewall is obstructing you from accessing by momentarily hindering the firewall network settings.

Post navigation

Press and hold that button for 10-15 seconds with the needle or clip.

How satisfied are you with this reply?

Click the key “Access Router Panel or Router Panel– 2” for accessing this IP address. Await few seconds to fully load the admin panel.

Great! Thanks for your feedback.

No CAA entries found

Thanks for your feedback, it helps us improve the site.

Open the Command Prompt on Windows PC Type ipconfig and hit the Enter Button. Then Check For the Default Gateway and the IP address in front of this line is your Router’s Default Login IP.Find IP Address on Linux PC:

How satisfied are you with this reply?


10. Last Certificates - Certificate Transparency Log Check1. Source CertSpotter - active certificates (one check per day)

I did some tests with this one on the link below and it gave great results, try it.

Find Your Router IP Address

Was this reply helpful?

14. TXT - Entries


Router Password

Click on Apply once you have updated network settings.



Weitere Optionen